| Step 1: |
|
Left click on your session folder (monitor symbol) that you want to run reports on. |
| |
Step 2: |
Access the diagnostic map by left-clicking on the System diamond. |
| |
Step 3: |
Right click for the list of options and select diagnostics by left-clicking on that option |
| |
Step 4: |
Select the map option by left clicking on it. |
| |
Step 5: |
Press any key (1-0) on each keypad and see the response pressed appear on the screen to verify that each keypad is working properly.
|
| |
Note: |
If the LED on the keypad blinks slowly (once every 2 seconds), try moving the keypad to another location in the audience, or closer to the interface.
If the LED on the keypad does not light or blinks rapidly when a button is pressed, change the 9V battery inside the keypad, then retest.
|
